What have you done to your Tacoma today?

IMG_1534179297.913947.jpg
Found this sucker on Craigslist, I haven’t had the chance to install it yet, but it’s a CBI OFF-ROAD T3 bumper with a swing-out and jerrycan mount. Only concern is no holes for sensors, I thought about drilling them but some people say the steel messes with the sensors for some reason. Any pointers? I’d lose both blind spot and parking.
 
View attachment 19974
Found this sucker on Craigslist, I haven’t had the chance to install it yet, but it’s a CBI OFF-ROAD T3 bumper with a swing-out and jerrycan mount. Only concern is no holes for sensors, I thought about drilling them but some people say the steel messes with the sensors for some reason. Any pointers? I’d lose both blind spot and parking.

Yes. Take the sensors out of the stock one and drill in the exact same place on the new one. The thickness should be close to the same. However, if the metal is too thick, take a larger, like 1/4 inch larger bit and drill from the back, but not all the way through, just to thin the metal for the sensors to click in. Then plug and play.
 
Back
Top