Pls help

[John dev]

I was changing the dome lights inside my 2018 tacoma
I think i blown a fuse but i cant find which fuse to check
I dont have lights now inside my truck
Plese help
Picture of the fuse would be great

Thanx

 

[OR17TRD]

Should be in the junction box in the cab.

 

[OR17TRD]

Good idea to take the fuse out when swapping builds so you don’t blow it

 

[OR17TRD]

Up under the drivers side dash by the hood release latch there is this box it has a diagram should be the one that says DOME

 

[John dev]

Hahahah thanx buddy your a great help
Thank you thank you thank you sir

I had to run down to oreily and buy a fuse
7.5

All good now working great

 

[Bogunn]

Hahahah thanx buddy your a great help
Thank you thank you thank you sir

I had to run down to oreily and buy a fuse
7.5

All good now working great

Like @OR17TRD said, it’s always good to pull the fuse before changing bulbs, or at least turn the dome lights off before changing.
There is a fuse puller and a couple spares in the fuse box under the hood. There isn’t a 7.5 though. A 10 would get you through in a pinch but I don’t like running a larger fuse.
I bought a set of spare Bussman ATM-LP fuses to keep in the truck for this reason. You never need them til you’re already SOL.

https://www.amazon.com/dp/B00L910U7C/ref=cm_sw_r_cp_api_DoAVBbGNRZQJ0

 

[John dev]

Ill do that when i continue changing my ligjt bulbs

Thanx really appreciate it