Just ordered these...

[longshore]

www.realtruck.com/toytec-toyota-coilover-shocks/ttafcs-ha.html

Seemed decent enough in the reviews. More guys and gals I talked to said Rancho was good, but Billys were newer technology. Rancho coils sagging was an issue for some too. But it's done now.

 

[rec2570]

www.realtruck.com/toytec-toyota-coilover-shocks/ttafcs-ha.html

Seemed decent enough in the reviews. More guys and gals I talked to said Rancho was good, but Billys were newer technology. Rancho coils sagging was an issue for some too. But it's done now.

Are you going with the full 3.5" lift? If so you'll wanna get uca's as well

 

[longshore]

Only want about 2" out of these. I'm going for better rear springs and only doing the front to level the truck. You think I'll need uppers?

 

[rec2570]

Only want about 2" out of these. I'm going for better rear springs and only doing the front to level the truck. You think I'll need uppers?

Depends on who you talk to. I've heard that you definitely need them with 3" lift and up. Below that is up to you. I have 2.5" lift with stock uca's and alignment isn't perfect but not off enough to cause uneven tire wear.

 

[longshore]

Hmmmm...going to do more research thanks rec!

 

[jordanp.fun]

Depends on who you talk to. I've heard that you definitely need them with 3" lift and up. Below that is up to you. I have 2.5" lift with stock uca's and alignment isn't perfect but not off enough to cause uneven tire wear.

Hey after your lift and tires did your traction control or abs lights come on?

 

[rec2570]

Hey after your lift and tires did your traction control or abs lights come on?

No lights came on for me after lift. Not sure what would make that happen.

 

[Mjp2]

No lights came on for me after lift. Not sure what would make that happen.

Could be the vsc needing recalibration, or an abs wheel sensor snag.