Bed Lights

Joonkin

Active Member
I have a 2016 SR5 and was wanting to install under rail bed lights. I'd like to wire it into the existing bed light switch to come on when the one on the rear of the cab comes on. Is this possible?
 
I was thinking about those but they only go on one side. I found a thread on another forum where someone installed a door pin switch that makes them come on when you lower the tailgate and turns off when you close it.
 
I ended up hooking them up to a momentary switch that I installed behind the tailgate right above the latch. So now they come on when I open the tailgate and go off when I close it.
 
Just find the wires that go to the existing bed lights and tap Into the. Might have to drill a small hole Into the bed to get the wires thru.
 
I ended up hooking them up to a momentary switch that I installed behind the tailgate right above the latch. So now they come on when I open the tailgate and go off when I close it.

Excellent, will look in to this. Can't go wrong with more lights! I'll have this thing looking like a Christmas tree before long.
 
Back
Top