Ultraguage

It looks like they are on top of their game pretty good.

After all the badgering us 2nd gens did.

I forgot the issue, but i think the mx 1.2 couldnt read some pids correctly, hence the reflash to 1.3 and then some math tweaking using the scangauges xcode worked.

Remember that if u guys ever want an x gauge code on the ultragauge 1.3
 
After all the badgering us 2nd gens did.

I forgot the issue, but i think the mx 1.2 couldnt read some pids correctly, hence the reflash to 1.3 and then some math tweaking using the scangauges xcode worked.

Remember that if u guys ever want an x gauge code on the ultragauge 1.3

Thanks for the info guys.
 
Zactly

Plus car chargers have been bad for phones over the years i heard.

Even my gps wire is run thru the console into the glove box with a dedicated 12v socket hidden in it
5WoAkG.jpg
Clean. I like clean.
 
Clean. I like clean.
Danks.


U may like this.... ran 4 sets of wires for abs kill, and lighting and sadly the stock wiring was a jumbled mess to begin with behind the fuse panel

After pulling new wires into place
camerazoom2012071816012.jpg


Ready to hide
camerazoom2012071816243.jpg


Tucked... u can barely see the green and red wiring in the corners. Once the 3 plugs were connected, it looked better
camerazoom2012071817054.jpg
 
Danks.


U may like this.... ran 4 sets of wires for abs kill, and lighting and sadly the stock wiring was a jumbled mess to begin with behind the fuse panel

After pulling new wires into place
camerazoom2012071816012.jpg


Ready to hide
camerazoom2012071816243.jpg


Tucked... u can barely see the green and red wiring in the corners. Once the 3 plugs were connected, it looked better
camerazoom2012071817054.jpg
Very nice. You’ll be jelly of my entertainment center :eek:CDC995ED-D69D-4EDD-940E-835CD19B171D.jpeg
 
Very nice. You’ll be jelly of my entertainment center :eek:View attachment 14549

Lol, i just moved my pc and desk from 1 room to another and just played that game.

As for my home stereo ****, im a bit behind too.

Im actually debating on switching walls for the tv and ent center. Its under an hvac vent and the system blows alot of dust. The vent wont even close all the way due to a bent fin. Maybe i can replace the vent with a new 1 and closing it will help.

Wtf is with all the rca cables brother?
Welcome to the hdmi world
 
Danks.


U may like this.... ran 4 sets of wires for abs kill, and lighting and sadly the stock wiring was a jumbled mess to begin with behind the fuse panel

After pulling new wires into place
camerazoom2012071816012.jpg


Ready to hide
camerazoom2012071816243.jpg


Tucked... u can barely see the green and red wiring in the corners. Once the 3 plugs were connected, it looked better
camerazoom2012071817054.jpg

Who taught you how to braid like that? Dug?
 
Couple years doing burg, fire alarms, cctv, residential and commercial, prewire (new construction), retrofit (existing structures).

Its not often in do that, but this was such a tight spot, it was the best route imo.

Definitely looks great. And if anything goes south and needs worked on you already have a huge head start on tracing wiring down.
 
Definitely looks great. And if anything goes south and needs worked on you already have a huge head start on tracing wiring down.
Thanks.... i pulled an extra pair of wires just in case, and theres a bit of twine thru the firewall for future pulls, and an extra 4 inches of service slack.
 
Back
Top