BAMF Bolt-On Slider 2016+ Tacoma DCLB 96" with Kick Out 0º Fill Plates Powder Coated

nodoze

Member
Up for sale is a *brand new* Bay Area Metal Fabrication Bolt-On Slider 96" for a 2016+ Tacoma DCLB for $850.00 (Lowered price from $1,000 and originally purchased for approximately $1,300.00).

INCLUDED FEATURES
  • Bolt-On
  • Kick Out
  • Power Coated
  • DOM Upgrade
  • Fill Plates
  • 0º flat that's best for use as a step
I had mistakenly ordered these instead of the short bed type. So they are complete and at the shop with Jerry of BAMF.

If interested PM me or contact Jerry directly (jerry@bayareametalfab.com) and let him know that you are interested in the Sliders Rudy posted.

BAMF
(707) 297-6190
Hours of normal operation
6:00 to 3:00pm Monday - Friday

20181105-143505.jpg


20181105-143538.jpg


20181105-143517.jpg


SHIPPING

The shipping you will be responsible for. They can ship to anywhere in the US but the shipping rates vary. According to the site, these are the price ranges:
  • West coast from $220 to $250 shipped to a home address.
  • The mid west and east coast run around $325 to $375 home shipping.
  • FL is just about as much to ship as HI with 96" bolt on sliders running up to and above the $400 range.

They Ship XPOLogistics "LTL Freight" for ALL sliders They will ship right to your house or if you have a business address it's $25 less to ship. All freight is quoted without a lift gate service if your not able to offload the sliders yourself from the truck there is another 165 dollar charge for a lift gate.

Find a hub here:
https://ltl.xpo.com/webapp/servicec...astmap2000&logotoggle=S&SICInfo=Y&TTMapInfo=N

OR LOCAL PICK UP if you are in the Bay Area. The shop is located in Benicia. Contact Jerry if you would like to do this.


A little about the sliders:
BAMF 96" Sliders fit Double cab long bed TACOMA
The all new 96" bolt on design for 2016+ trucks is 100% bolt on with no drilling and is the strongest "True bolt on available" with ten 1/2" Grade 8 bolts for each slider holding them on. Three of them are on the bottom side of the frame no other company offers that! (NOTE) some of the 2010 models have the older frames so some light modification may be needed to clear the rivets.

Specs: Built from 1.75" .120 wall DOM CNC plasma cut bent, notched and fully welded to a 2"x 2" square tube with CNC formed 3/16th laser cut legs and frame plates. Measured at the kick out they stick out 15" past the trucks frame.
 
Last edited:
Back
Top