Tires for Wide Stance

rheaume7

New Member
New here. I have a 13 Tacoma Limited SBDC. Want to put a 2" lift on it. I only do trails. Never anything really high up. I have 18" rims. Any suggestions on what would be a good tire size to go with that would give me a wide stance?
 
wider stance depends on rims/spacers, not tires.
It depends on the offset of the rims, I know you're not recommending it but I wouldn't put spacers on anything I drive.

I would suggest 30 millimeter negative offset JMO

Custom Offset


positive-offset.jpg



negative-offset.jpg
 
Last edited:
Yes it does,tires are made wider they have a lot to do with stance
I wouldn’t say a lot. They have some effect on it. The majority of the “poke” is from rim offset or a spacer (I wouldn’t recommend spacer if you can use offset). Some is from width of rim and then tire. Tire width plays the least in this equation. You shouldn’t run a wide tire on a narrow rim nor a wide rim with a narrow tire. There is a happy ratio on tire width to rim width. There is also a happy place on these trucks when it comes to offsets as well as rim and tire dimensions. It’s science. :D
 
New here. I have a 13 Tacoma Limited SBDC. Want to put a 2" lift on it. I only do trails. Never anything really high up. I have 18" rims. Any suggestions on what would be a good tire size to go with that would give me a wide stance?
The size of tires depend on the offset of the wheels. If they are close to stock offset 265/65/18 if you don’t want to worry about other mods. You may get away with a 275/70/18 but probably will need modifications to the wheel well for rubbing.
 
I wouldn’t say a lot. They have some effect on it. The majority of the “poke” is from rim offset or a spacer (I wouldn’t recommend spacer if you can use offset). Some is from width of rim and then tire. Tire width plays the least in this equation. You shouldn’t run a wide tire on a narrow rim nor a wide rim with a narrow tire. There is a happy ratio on tire width to rim width. There is also a happy place on these trucks when it comes to offsets as well as rim and tire dimensions. It’s science. :D
 
So your saying a 65mm tire will poke out the same or no different than an 85mm tire? Come on!
Are we taking about LEGO tires now? RC cars? I guess I’ll play. :D
A 65mm tire is going to be 20mm shorter than a 85mm tire. The width could be the same. You’re taking about 2.5 inch tires compared to 3.3 inch tires.

If you’re referring to a 265/65/18 vs a 285/65/18 the width is going to be 0.8” wider in total which will only give you 0.4” of “poke” or “stance” that’s equal to 10mm of negative offset.
What I was saying was a wider tire alone isn’t going to give you a “lot” of stance. You said “Yes it does,tires are made wider they have a lot to do with stance” I said “I wouldn’t say a lot. They have some effect on it” Most people are looking for at least 1-2” of poke when they want a wide or aggressive stance.
Changing the wheel offset can give a greater stance then a wider tire. Even more when paired with a wider tire. You’re going to need a lower offset (or wheel spacer) to run a 285 on the Tacoma anyways. If you put them on a stock wheel they will rub the control arm.
A zero or -6 offset works well with a 285. You'll also need at least a 2” lift.
285/65/18 with a -6 offset will give you about 1.6” of poke for a more aggressive stance. Compared to a +25 OEM wheel with 285/65/18 at 0.4” of poke. You get 1.2” more with offset. Or you can get a 1.25” wheel spacer to achieve the same thing.
I stand by my previous statement.
 
Back
Top