Lifting my taco and it rubs

[rosemeadblvd]

2017 TRD Off-road DCSB. Here are the mods.
1. Mickey Thompson MTZ p3 285/75/16
2. Fox 2.5 reservoir front And back
3. ICON AAL 51100
4. ICON UCA
5. Diff drop kit
The rear gives me around 7 CM like around 3"
The front gives me only around 3CM like around 1.25" lift. This is the original fox shocks height when they came in. I have the stock TRD Off-road plus spidertrax 1.25" spacer on them. Alignment has already done.
There are 2 places rubbing. Please refer to the photos. The first one is the rubbing photo the rest just for fun.
I think I will have to adjust my front coilover height. How do I do this?

 

[OR17TRD]

2017 TRD Off-road DCSB. Here are the mods.
1. Mickey Thompson MTZ p3 285/75/16
2. Fox 2.5 reservoir front And back
3. ICON AAL 51100
4. ICON UCA
5. Diff drop kit
The rear gives me around 7 CM like around 3"
The front gives me only around 3CM like around 1.25" lift. This is the original fox shocks height when they came in. I have the stock TRD Off-road plus spidertrax 1.25" spacer on them. Alignment has already done.
There are 2 places rubbing. Please refer to the photos. The first one is the rubbing photo the rest just for fun.
View attachment 14028View attachment 14029View attachment 14030View attachment 14031View attachment 14032View attachment 14026View attachment 14027I think I will have to adjust my front coilover height. How do I do this?

You’ll need about 1.25 more inches of lift in the front. Then it will only rub when turning and hitting a bump.

 

[rosemeadblvd]

You’ll need about 1.25 more inches of lift in the front. Then it will only rub when turning and hitting a bump.

Even with additional 1.25" it will still rubbing? Meaning that I may not take it to off-road?

 

[whippersnapper02]

Even with additional 1.25" it will still rubbing? Meaning that I may not take it to off-road?

Pretty much. These trucks want almost 3 inches for 285s. OEM wheels?

 

[rosemeadblvd]

Pretty much. These trucks want almost 3 inches for 285s. OEM wheels?

If that is the case do you recommend to go back down size? I want to be able offroading with 286/75/16

 

[OR17TRD]

If that is the case do you recommend to go back down size? I want to be able offroading with 286/75/16

Lots for us have 285/75/16 with 2.5-3” lifts and take our trucks off road. I rarely get rubbing and have a 3” lift. Lift it as high as you can and get an alignment shop or off road shop to align it.
Camber as close to 0 as possible
Toe as close to 0 as possible
Caster 2.5 or higher.
If the person doing the alignment is good it will help decrease rubbing.

 

[Bojangles]

I want your tape measure

 

[rosemeadblvd]

I want your tape measure

On floor height?
Before rear 37.4" After 40"
Before front 36" After 37.2"

 

[Bojangles]

On floor height?
Before rear 37.4" After 40"
Before front 36" After 37.2"

No, that actual tape measure... its not like anything ive ever seen before.

 

[Bojangles]

No joke

 

[rosemeadblvd]

it is measured in CM front floor to the fender. I'm sorry I don't understand what you mean by actual measurements

 

[OR17TRD]

it is measured in CM front floor to the fender. I'm sorry I don't understand what you mean by actual measurements

He wants your physical tape measure the one you’re using to measure with. Please send it to him via the mail. Haha

 

[rosemeadblvd]

Now I got it LOL.