Overland build

[jbangs433]

Hey guys need some help over looking for some info on building the truck.
Doing an over land build thread.

Suspension
Front coils from freedom offroad 4 inch lift coil overs with new UCA and 3 inch spindle lift.

Rear freedom off road 1-3" shocks deaver leaf springs and 4inch shackle.lift.

I'm not going with rought country's 6 or fabtwch six inch lift

Any suggestions would be appreciated

Picture is stock this is what I have 02 Toyota tacoma 3.4l v6 prerunner

 

[Bojangles]

Hey guys need some help over looking for some info on building the truck.
Doing an over land build thread.

Suspension
Front coils from freedom offroad 4 inch lift coil overs with new UCA and 3 inch spindle lift.

Rear freedom off road 1-3" shocks deaver leaf springs and 4inch shackle.lift.

I'm not going with rought country's 6 or fabtwch six inch lift

Any suggestions would be appreciated

Picture is stock this is what I have 02 Toyota tacoma 3.4l v6 prerunnerView attachment 24318

4wd conversion

I hope u have a massive front bumper and winch planned, the coils are 616lb
Many 1st genners complain about rough ride with eibach 620 coils.

 

[jbangs433]

Okay not understanding what you mean

 

[goob760]

Okay not understanding what you mean

He’s saying that the rating for the coils you are getting are 600+ lbs so unless you plan on putting on a big front bumper and winch you don’t really need that big of coils. They will ride rough without being loaded down in the front by a winch and heavy bumper

 

[jbangs433]

I was gonna put a winch really not sure though so I can go with just bilstein 5100's set up with a 2 inch drip spindle and shackle lift in the back??