2018 tacoma with every sensor flashing

Bob chomyshen

New Member
Ok so a friend has a 2018 tacoma loaded but every warning ⚠️ showed from the 2to4 not working, every other safety feature and the abs is flashing. It's been parked for a while maybe a few months. And the battery terminals where badly corroded. But it started and drove fine with a 1 day permit. Now it's basically in limp mode. Any idea s.
 
If start with cleaning battery connections, fully charge and then check battery to make sure it's good, clear all codes, then go from there and see what ya got. Any new codes probably won't reappear immediately but it could be one thing causing all the issues. Could be just a battery in weakend state from sitting and corroded connections.
 
Back
Top