CBI Sliders Install

TacoTuesday206

TacoTuesday206

Member
Hi all,
I slated to get my sliders this Thursday and wondering if there if anyone done the install by themselves with no help. Any suggestions? Thanks
 
TacoTuesday206 said:
Hi all,
I slated to get my sliders this Thursday and wondering if there if anyone done the install by themselves with no help. Any suggestions? Thanks
Click to expand...
Jack stands to hold em at the right height and angle while you weld?
Paint all but the last 2 inches of support legs until after welded.

Make sure the pinch weld is either far enough not to rub the sliders while articulating, or smash the pinch weld with a hammer and rattle can.
 
Bojangles said:
Jack stands to hold em at the right height and angle while you weld?
Paint all but the last 2 inches of support legs until after welded.

Make sure the pinch weld is either far enough not to rub the sliders while articulating, or smash the pinch weld with a hammer and rattle can.
Click to expand...
You’ve seen it done once. :D
 
Installed no problem. Of course missed the slider nut first time around and had to undo everything and restart. Used a floor jack for 3rd arm.
 
You must log in or register to reply here.
Back
Top