License Plate

[bhturner63]

Ok, dumb question. The license plate screws that came on my 2015 Tacoma do not tighten all the way and anyone could unscrew them with their fingers. I ordered a nice black Toyota tag frame and it came today, but the screws that came with it are smaller than the holes in the bumper. I need suggestions on what's best to use. Thanks


Sent from my iPhone 7 using Taco Forum

 

[whippersnapper02]

Front bumper?

 

[bhturner63]

No the rear bumper


Sent from my iPhone 7 using Taco Forum

 

[whippersnapper02]

I used a bolt with a nut and washers for mine.

 

[bhturner63]

Ok I'm glad that you mentioned that. I had the same idea, but there is less than an inch between the hole where the bolt comes through and part of the frame. I couldn't even get the nut on the bolt using needle nose pliers. Frustrating


Sent from my iPhone 7 using Taco Forum

 

[Mjp2]

Jab a plastic wall anchor in there

 

[longshore]

Get a box end 3/8 on the nut and you can fit it in there. I used lock nuts.