Power steering thru granny cooler?

[Onewyr]

I just installed a new radiator that has the tyranny cooler in it I have a 5spd so I was wondering if running the power steering thru the tyranny cooler would be a good idea when I put the new pump in

 

[Onewyr]

Omfg auto correct I hate you. That is supposed to be tranny not granny.

 

[whippersnapper02]

You can. I don't see much of a benefit unless you had a solid axle and/or huge tires.

 

[Onewyr]

Was just curious. The previous owner says he has put 3 pumps in in the last year or so. So I wasn't sure if the pumps had an over heating issue or if the guy just didn't know wtf he was doing.

 

[whippersnapper02]

Holding the wheel at full lock can overheat the pump. It is possible he is a crappy driver.

 

[Onewyr]

My plans are to do a 3"ome lift and hopefully squeeze my 34x10.50x15 LTBs under it

 

[whippersnapper02]

By huge I mean 37s or larger.

 

[Onewyr]

Ok I doubt I'll ever go that big but I'll just make sure that the inlet and outlet for the tranny stay well sealed incase I ever go that big

 

[whippersnapper02]

Also a cooler would be a bandaid for the real problem. If the previous owner went through a bunch of new pumps, did he ever think something else may be wrong like a plugged resivoir screen?