95 4cyl 2.7L misfire

[reyfigueroa14]

I have a 1995 Tacoma. initial problem: wouldn't turn over, it would crank but not catch. got that problem resolved by changing the Distributor cap wires and plugs. starts fine.
Secondary problem arouse. no code, There is a constant misfire during acceleration around 1500-2500+rpm but still no code. Changed the head gasket, sensor, computer, and cleaned the fuel injectors. still misfiring. not sure what to do next? 241,000 miles still runs well up to this point.

 

[CFDFireman90]

Plugs and wires? I would have started there.

 

[CFDFireman90]

Sorry, read it to fast and missed that you did it.

 

[CFDFireman90]

Valve sticking? Just spit balling after all you have tried already.

 

[OffroadTaco4x4]

If you changed the head gasket then in sure you checked all the cylinders and pistons and valves correct?

 

[reyfigueroa14]

thanks for the suggest, will check and double check all the above.

 

[OffroadTaco4x4]

Also check and see which cylinder is loosing compression before you do any of that. I'm sure you can rent a compression tester from a local auto parts store