Creaking sound emanating from steering stops at full turn

[BlueFalconTaco]

So I noticed the moment I got my truck lifted and got bigger tires on it that when I turn the wheel all the way to either side and move at a slow speed, I get this loud creaking/popping sound. I've looked around other forums about this that say it's normal but I thought I'd get yals take on this and see if anyome else has had or has this issue.

Thanks!

 

[whippersnapper02]

Normal. The steering stop is metal on metal so it will make noise. I avoid full lock turns if I can.

 

[Atomic Diesel]

It's just your CV joints getting ready to fly apart. Oh wait, this isn't the Ranger/ Colorado forum...Ne'ermind

 

[OU81taco16]

Lube it with some grease. Put some on your finger wipe it into either or both parts.

 

[BlueFalconTaco]

Lube it with some grease. Put some on your finger wipe it into either or both parts.

Any particular brand?

 

[OR17TRD]

Lube it with some grease. Put some on your finger wipe it into either or both parts.

That’s what she said

 

[2Gen405]

So I noticed the moment I got my truck lifted and got bigger tires on it that when I turn the wheel all the way to either side and move at a slow speed, I get this loud creaking/popping sound. I've looked around other forums about this that say it's normal but I thought I'd get yals take on this and see if anyome else has had or has this issue.

Thanks!

I have had this same issue, truck creaks/pops when backing out or pulling into driveways as well as when driving below 30 mph, feel like it may have something to do with control arms. A part seems to be missing on one side, and creaks/pops occur on the front driver's side wheel well. Any ideas?

 

[tacojoel]

Without physically checking the truck out, could be anything from worn body mounts, suspension components to ball joints.