Hi lift jack

[Deisel88]

Anyone know if you can use a hi lift jack on a tacoma without steel bumpers or rock sliders? My stock jack won't come close to lifting my truck with a 3" lift

 

[silverpataco]

I've told many people this, Google whatever your looking for and you'd be amazed! Look at the high lift site!

 

[texastacoma]

Anyone know if you can use a hi lift jack on a tacoma without steel bumpers or rock sliders? My stock jack won't come close to lifting my truck with a 3" lift

Where are you jacking from, the bottle jack that came with my 13 is plenty talk to get to the bottom of the axle with my 32s

 

[Deisel88]

Mine won't get the tire off the ground when I jack from the axle

 

[Deisel88]

Looked at there site don't know what I'm suppose to be seeing

 

[silverpataco]

Hooks and yellow straps are for lifting at the wheel not going help if you need that one off with a flat!!! The other one has the chain. Might be long enough to hook around the rear near the frame? This is one of the problems with everyone wanting a higher truck. Cheap spacer Add a Leaf lift, or even actually spending the money building a solid front suspension then leaving the factory "look" on the bumpers! Get a flat and then oh **** who do I lift it! Also look for other jacks besides High Lift.

 

[Demo Man]

View attachment 6444
Hooks and yellow straps are for lifting at the wheel not going help if you need that one off with a flat!!! The other one has the chain. Might be long enough to hook around the rear near the frame? This is one of the problems with everyone wanting a higher truck. Cheap spacer Add a Leaf lift, or even actually spending the money building a solid front suspension then leaving the factory "look" on the bumpers! Get a flat and then oh **** who do I lift it! Also look for other jacks besides High Lift.

What if they gave a hitch. Do you think it's possible to lift the rear enough to change a flat. Just a thought.

 

[silverpataco]

Call me I'll come pick it from whatever corner you need!

 

[Demo Man]

Call me I'll come pick it from whatever corner you need!

Lol. If your bearings hold up in the front end getting here.

 

[silverpataco]

I'd bet factory Jack works under the rear axle on either side! The real problem here lies in people doing whatever lift they choose. Then taking the truck off road getting a flat or tire rolling off the rim. Try jacking up the truck 15 miles off a paved road on the side of a mountain with the the factory bottle Jack ! LMFAO ! Good luck "4wheelers"!

 

[silverpataco]

Or in these situations!

 

[silverpataco]

Lol. If your bearings hold up in the front end getting here.

Got the ALL4 mini

 

[Deisel88]

No help

 

[Demo Man]

Got the ALL4 mini View attachment 6453

If you have to come pull me out in that I'm getting a Prius.

 

[texastacoma]

Anyone know if you can use a hi lift jack on a tacoma without steel bumpers or rock sliders? My stock jack won't come close to lifting my truck with a 3" lift

You might be able to put the hi lift in the tube of the hitch... Not sure if I personally would do it, but it's possible, not really sure how you could jack the front end...

 

[silverpataco]

Remember non after market bumper people this, you've got no protection on your corners AT ALL! **** ass aluminum frame rail to frame rail big deal ! One offset corner hit on a 100 lbs. deer and your doing $2500 plus in damage ! HaHa so **** the supercharger and protect your ass and your families with some steel !

 

[texastacoma]

View attachment 6463
Remember non after market bumper people this, you've got no protection on your corners AT ALL! **** ass aluminum frame rail to frame rail big deal ! One offset corner hit on a 100 lbs. deer and your doing $2500 plus in damage ! HaHa so **** the supercharger and protect your ass and your families with some steel !

On my 13 the aluminum brace is about 6" shorter on each side...