LED light bulbs installed

AdamOstan

Member
Bought these AUXITO LED bulb to replace my 18 tacoma dim headlights. I was able to install all 4 (low & high beams) in under 1 hour. The fit is spot on as well. I would recommend readjusting your headlights after installing these as the do change your beam height. I also did not have an issue with the diodes clocking at 3 & 9, but these light come with extra set screws & a way to adjust them.
1677290684590.png
1677290699461.png
 
Looks great and thats why people like you convinced me also to switch to LEDs in my new After market Nilight headlamps and fogs,old ones were 13 years old and beyond polishing. I wen to Autozone and tried Sylvanias newest LED s for head and fogs. Sylvania ULTRA LED 9003 H4 and H11. I wasnt sure how to install the rubber boot and store mgr showed me how to remove 3 tab star on 9003 and install the 3 tab star alone first, snap w/ spring in,install the rubber boot , then the bulb inserts and a slight twist to lock in,and connect connector. Thats what held me back, they dont show on instructions. I LOVE my new LEDs, and boo hoo to those that argue with you like what got me kicked off Tacoma World by the LED NAZIs! LOL
 
Here is what I bought and installed
 

Attachments

  • 20250914_134435.webp
    20250914_134435.webp
    448.2 KB · Views: 1
  • 20250914_132040.webp
    20250914_132040.webp
    969.4 KB · Views: 1
  • 20250914_132100.webp
    20250914_132100.webp
    1 MB · Views: 1
Back
Top