The BS Thread To Rule Them All!!!

OR17TRD said:
That’s crazy.
Click to expand...
Hey there OR17! Yes it was.........dropped 20° in about 10 minutes.......winds went from calm to 44mph out of the north........crazy weather........reportedly had a tornado on the ground SW of us in Kansas.
 
B-Man said:
Hey there OR17! Yes it was.........dropped 20° in about 10 minutes.......winds went from calm to 44mph out of the north........crazy weather........reportedly had a tornado on the ground SW of us in Kansas.
Click to expand...
Yeah those drops can cause some weird things to happen.
 
B-Man said:
Hey there OR17! Yes it was.........dropped 20° in about 10 minutes.......winds went from calm to 44mph out of the north........crazy weather........reportedly had a tornado on the ground SW of us in Kansas.
Click to expand...
Yep, here in Minneapolis we got tornado, hail warning two days in a row. It got really bad but nothing happen in my area.
 
OR17TRD said:
Calling all hands... calling all hands.
Click to expand...
Exactly! Haha! I just finished putting a hot tub, with underground electrical, pavers, a gazebo, went all out for the white jeep. And I keep the red pos jeep running and built a rear bumper with a tire carrier and can holders a while back for it. Time to call in all favors. Haha!
 
Crawdad said:
Exactly! Haha! I just finished putting a hot tub, with underground electrical, pavers, a gazebo, went all out for the white jeep. And I keep the red pos jeep running and built a rear bumper with a tire carrier and can holders a while back for it. Time to call in all favors. Haha!
Click to expand...
Those floors will be so much better than that nasty carpet haha
 
Crawdad said:
For sure. I can't wait to see it done. Haha! This looks like its going to be the easiest flooring I've ever done. Just a lot of work to get to that point.
Click to expand...
Get an install kit with the spacers for the walls, the setting tool and a rubber mallet. I use a piece of the cut flooring to attach in the groove so you don’t mess them up when knocking it tight. Run it length wise the same as the longest length of the house. Cut the floor to fit the house don’t try to make the house fit the floor. Start in a corner go the length of that room and just start filling in all the rooms as you go until it’s done. Once you get going it goes pretty fast and is very easy to install. I’ve done a few houses with that flooring. I wrap some painters tape around the bottom of the bar where I’m hitting so it doesn’t scratch the floor. FF4000BA-F80E-4C92-BE5E-2B0971B5D08E.jpeg
 
OR17TRD said:
Get an install kit with the spacers for the walls, the setting tool and a rubber mallet. I use a piece of the cut flooring to attach in the groove so you don’t mess them up when knocking it tight. Run it length wise the same as the longest length of the house. Cut the floor to fit the house don’t try to make the house fit the floor. Start in a corner go the length of that room and just start filling in all the rooms as you go until it’s done. Once you get going it goes pretty fast and is very easy to install. I’ve done a few houses with that flooring. I wrap some painters tape around the bottom of the bar where I’m hitting so it doesn’t scratch the floor. View attachment 18288
Click to expand...
I got summa the thems, I'm actually running at a 45. I got bored. Haha
 
You must log in or register to reply here.
Back
Top