Pro comp 3" lift with pro comp 9000 shocks and add a leaf

[Manwithoutaplan]

Christian you should sell your foxes and get the baja setup haha.

 

[whippersnapper02]

I know right? 300 less for stock junk.

Actually I'm eh with my setup. I think I was expecting more from it. Wheeling felt the same as stock.

 

[Manwithoutaplan]

I know right? 300 less for stock junk.

Actually I'm eh with my setup. I think I was expecting more from it. Wheeling felt the same as stock.

still better setup than the baja.

 

[OffroadTaco4x4]

2wd - Lift spindles with 5100s set to 0

4wd - 5100s with Eibach coils

Too much money and you like overkill 2wd - New coilovers with a spindle lift
" " " 4wd - New coilovers

I got my 5100s a week ago and when I install them I will be running stock springs, how much better are eibach then stock? And could you give me a link as to where I could find them?

 

[whippersnapper02]

The Eibachs provide lift on their own. I suggest them because you would have to preload your 5100s less to get the desired lift so you get a softer ride.

http://toyteclifts.3dcartstores.com/ToytecEibach-front-coil-lift-springs_p_14.html

 

[OffroadTaco4x4]

What is the maximum amount of lift in the front I could get with the 5100s and the new coils without causing other problems? Could I get 3inches?

 

[whippersnapper02]

About 2 without new uppers and 3 with uppers. After you change the uppers you are stuck with the limits of the CVs.

 

[OffroadTaco4x4]

Yeah that's about what I thought, I plan on getting uppers but not yet, I guess I'll just hold off on the coils and stick with the 2.5 lift of the 5100s, thanks tho!

 

[Konaborne]

I ran the 5100's / eibachs for 3.5" of lift and didnt have any problems except for minor vibes

 

[whippersnapper02]

1st gen vs 2nd gen.